Disodium phosphate

(Redirected from Disodium hydrogen phosphate)

Disodium phosphate (DSP), or disodium hydrogen phosphate, or sodium phosphate dibasic, is an inorganic compound with the chemical formula Na2HPO4. It is one of several sodium phosphates. The salt is known in anhydrous form as well as hydrates Na2HPO4·nH2O, where n is 2, 7, 8, and 12. All are water-soluble white powders. The anhydrous salt is hygroscopic.[1]

Disodium phosphate
Structural formula of disodium phosphate
Ball-and-stick model of the component ions of disodium phosphate
  Sodium, Na
  Phosphorus, P
  Oxygen, O
  Hydrogen, H
Names
IUPAC name
Disodium hydrogen phosphate
Other names
  • Acetest
  • Dibasic sodium phosphate
  • Disodium hydrogen orthophosphate
  • Disodium hydrogen phosphate
  • Disodium phosphate
  • Sodium phosphate dibasic
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard100.028.590 Edit this at Wikidata
EC Number
  • 231-448-7
E numberE339(ii) (antioxidants, ...)
RTECS number
  • WC4500000
UNII
  • InChI=1S/2Na.H3O4P/c;;1-5(2,3)4/h;;(H3,1,2,3,4)/q2*+1;/p-3 ☒N
    Key: BNIILDVGGAEEIG-UHFFFAOYSA-K ☒N
  • InChI=1/2Na.H3O4P/c;;1-5(2,3)4/h;;(H3,1,2,3,4)/q2*+1;/p-3
    Key: BNIILDVGGAEEIG-DFZHHIFOAK
  • OP(=O)([O-])[O-].[Na+].[Na+]
Properties
Na2HPO4
Molar mass
  • 141.96 g/mol (anhydrous)
  • 177.99 g/mol (dihydrate)
  • 268.07 g/mol (heptahydrate)
AppearanceWhite crystalline solid
OdorOdorless
Density1.7 g/cm3
Melting point250 °C (482 °F; 523 K) Decomposes
7.7 g/(100 ml) (20 °C)
11.8 g/(100 ml) (25 °C, heptahydrate)
SolubilityInsoluble in ethanol
log P−5.8
Acidity (pKa)12.35
−56.6·10−6 cm3/mol
1.35644 to 1.35717 at 20°C
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Irritant
NFPA 704 (fire diamond)
Flash pointNon-flammable
Lethal dose or concentration (LD, LC):
17000 mg/kg (rat, oral)
Safety data sheet (SDS)ICSC 1129
Related compounds
Other anions
sodium phosphite
Other cations
Dipotassium phosphate
Diammonium phosphate
Related compounds
Monosodium phosphate
Trisodium phosphate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

The pH of disodium hydrogen phosphate water solution is between 8.0 and 11.0, meaning it is moderately basic:

HPO2−4 + H2O ⇌ H2PO4 + OH

Production and reactions

It can be generated by neutralization of phosphoric acid with sodium hydroxide:

H3PO4 + 2 NaOH → Na2HPO4 + 2 H2O

Industrially It is prepared in a two-step process by treating dicalcium phosphate with sodium bisulfate, which precipitates calcium sulfate:[2]

CaHPO4 + NaHSO4 → NaH2PO4 + CaSO4

In the second step, the resulting solution of monosodium phosphate is partially neutralized:

NaH2PO4 + NaOH → Na2HPO4 + H2O

Uses

It is used in conjunction with trisodium phosphate in foods and water softening treatment. In foods, it is used to adjust pH. Its presence prevents coagulation in the preparation of condensed milk. Similarly, it is used as an anti-caking additive in powdered products.[3] It is used in desserts and puddings, e.g. Cream of Wheat to quicken cook time, and Jell-O Instant Pudding for thickening. In water treatment, it retards calcium scale formation.[citation needed] It is also found in some detergents and cleaning agents.[2]

Heating solid disodium phosphate gives the useful compound tetrasodium pyrophosphate:[citation needed]

2 Na2HPO4 → Na4P2O7 + H2O

Laxative

Monobasic and dibasic sodium phosphate are used as a saline laxative to treat constipation or to clean the bowel before a colonoscopy.[4]

References

External links