شابلون:ساواش بیلگی قوتوسو

Battle of Lützen
	شامیل دیر:the Thirty Years' War
	; The Battle of Lützen by Carl Wahlbom shows the death of King Gustavus Adolphus on 16 November 1632.
تاریخ	6 November (O.S.) or 16 November (N.S.), 1632
یئر	Near Lützen, southwest of Leipzig; (present-day Germany)51°15′N 12°08′E / 51.250°N 12.133°E
نتیجه	Protestant victory ; (see Aftermath section)
دویوشچولر
Sweden; Protestant Union	مقدس روم ژرمن ایمپراتورلوغو; Catholic League
باشچیلار و لیدرلر
Gustavus Adolphus ☪; Dodo von Knyphausen; Bernhard of Saxe-Weimar; Robert Munro, 18th Baron of Foulis	Albrecht von Wallenstein; Heinrich Holk; Count Gottfried zu Pappenheim (DOW)
گوج
12,800 infantry; 6,200 cavalry; 60 guns	10,000 infantry; 7,000 cavalry, plus 3,000 infantry and 2,000 cavalry on arrival; 24 guns
تلفاتلار و ایتکیلر
3,400 dead and 1,600 wounded or missing	Probably about the same as Swedish casualtiesشابلون:Fakeref

شابلون بلگه‌له‌مه‌سی

شابلون:Convert to use Infobox

Usage

A military conflict infobox (sometimes referred to as a warbox) may be used to summarize information about a particular military conflict (a battle, campaign, war, or group of related wars) in a standard manner.

Information summarized in an infobox should follow the general guidance for writing a lead section. It should not "make claims" or present material not covered by the article. As with a lead section, there is some discretion in citing information in an infobox. The same guidance should be applied to an infobox as given for citations in a lead section. Information in an infobox must conform with verifiability, point-of-view and other policies.

Information in the infobox should not be "controversial". Refer the reader to an appropriate section in the article or leave the parameter blank rather than make an unsubstantiated or doubtful claim.

The infobox should be added using the {{infobox military conflict}} template, as shown below:

{{Infobox military conflict| conflict    = | width       = | partof      = | image       = | image_size  =| alt         =| caption     = | date        = | place       = | coordinates = <!--Use the {{coord}} template -->| map_type    = | map_relief  = | map_size    = | map_marksize = | map_caption = | map_label   = | territory   = | result      = | status      = | combatants_header = | combatant1  = | combatant2  = | combatant3  = | commander1  = | commander2  = | commander3  = | units1      = | units2      = | units3      = | strength1   = | strength2   = | strength3   = | casualties1 = | casualties2 = | casualties3 = | notes       = | campaignbox = }}

Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).

Parameters

conflict – the name of the conflict being described (e.g. "Battle of Lützen" or "World War I").
width – optional – the width of the infobox, e.g. "400px"; defaults to: "315px".
partof – optional – the larger conflict containing the event described in the article. For battles or campaigns, this should be the war during which the event takes place; for particularly large wars, this may include a theatre (e.g. "the Eastern Front of World War II"). For wars, the parameter may be used to link to a larger group of wars (e.g. the Italian War of 1521–26 to the Italian Wars). It may be necessary to insert "the" before the name of the war for proper grammar.
image – optional – an image for the warbox. Given in the form Example.jpg
image_size – optional – a size for the image
alt – optional – Alternative text for image that is accessible to screen readers to help the visually impaired
caption – optional – the text to be placed below the image.
date – optional – the date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.
place – the location of the conflict. For conflicts covering a wide area, a general description (e.g. "France", or "Europe", or "Worldwide") may be used.
coordinates – optional – the location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title. Used to display the geographic location of the conflict and the location on a map added with the map_type parameter.
map_type – optional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
map_relief – optional – "yes" if the location map is a relief map; see {{location map}} for more details.
map_size – optional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
map_mark – optional – the name of a file to use as the location map marker, e.g. Green_pog.svg; defaults to: "Red_pog.svg".
map_marksize – optional – width of the location map marker in pixels (px), e.g. "10"; defaults to: "8".
map_caption – optional – caption displayed below the location map; defaults to "Location within {{{map_type}}}", e.g. "Location within Scotland".
map_label – optional – the label placed next to the marker on the location map.
territory – optional – any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.
action – optional – In case of Coup d'État, short description of modus operandi, e.g. "...marched over the city...", "...dissolving the Congress of the Republic...", "...take the government hostage ...", "...put the country under military control ...", etc.
result – optional – this parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much.
status – optional – for ongoing conflicts, the current status of the conflict. This should not be used if a final result (above) is provided.
combatants_header – optional – sets the header text for the combatants section. Default is "Belligerents". In case of Coup d'État, use "Government-Insurgents "
combatant1/combatant2/combatant3 – optional – the parties participating in the conflict. This is most commonly the countries whose forces took part in the conflict; however, larger groups (such as alliances or international organizations) or smaller ones (such as particular units, formations, or groups) may be indicated if doing so improves reader understanding. When there is a large number of participants, it may be better to list only the three or four major groups on each side of the conflict, and to describe the rest in the body of the article. The combatant3 field may be used if a conflict has three distinct "sides", and should be left blank on other articles. Combatants should be listed in order of importance to the conflict, be it in terms of military contribution, political clout, or a recognized chain of command. If differing metrics can support alternative lists, then ordering is left to the editors of the particular article.
- combatant1a/combatant2a/combatant3a – optional – in cases where the parties significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the combatantN fields (above).
- combatant1b/combatant2b/combatant3b – optional – additional row, as above.
- combatant1c/combatant2c/combatant3c – optional – additional row, as above.
- combatant1d/combatant2d/combatant3d – optional – additional row, as above.
- combatant1e/combatant2e/combatant3e – optional – additional row, as above.
commander1/commander2/commander3 – optional – the commanders of the military forces involved. For battles, this should include military commanders (and other officers as necessary). For wars, only prominent or notable leaders should be listed, with an upper limit of about seven per combatant column recommended. Ranks and position titles should be omitted. The {{KIA}} and {{POW}} templates may be included immediately after the names of commanders who were killed in action or surrendered and were taken prisoner, respectively. The commander3 field can only be used if the combatant3 field is set.
- commander1a/commander2a/commander3a – optional – in cases where the commanders significantly changed over the course of the conflict, these subsidiary fields may be used to provide additional rows for the commanderN fields (above).
- commander1b/commander2b/commander3b – optional – additional row, as above.
- commander1c/commander2c/commander3c – optional – additional row, as above.
- commander1d/commander2d/commander3d – optional – additional row, as above.
- commander1e/commander2e/commander3e – optional – additional row, as above.
units1/units2/units3 – optional – the units or formations involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field. The units3 field can only be used if the combatant3 field is set.
strength1/strength2 – optional – the numerical strength of the units involved.

polstrength1/polstrength2 – optional – In case of Coup d'Etat, political organizations that supported the government (1) respective the insurgents (2).
milstrength1/milstrength2 – optional – In case of Coup d'Etat, military units that supported the government (1) respective the insurgents (2).

strength3 – optional – if combatant3 is set, this is a third strength field identical to the two above; if it is not set, this is an alternate combined field for use where only the total participation in a conflict is known.
casualties1/casualties2 – optional – casualties suffered (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Note that this section of the infobox is headed "Casualties and losses". Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.
casualties3 – optional – if combatant3 is set, this is a third casualty field identical to the two above; if it is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.
notes – optional – optional field for further notes; this should only be used in exceptional circumstances.
campaignbox – optional – optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.شابلون:Campaign/doc

شابلون:Operational plan/doc

Microformat

The HTML markup produced by this template includes an hCalendar microformat, which makes the event details parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to a calendar or diary application. Within the hCalendar is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Dates will only be included if you use {{Start date}} or {{End date}} (use the former for single dates, but do not use any of these if the date is before 1583 CE). {{End date}} requires that a time be specified, but display of this time may be suppressed by adding |nodate=yes to the end.

To include a URL, use {{URL}}.

hCalendar uses HTML classes including:

attendee
dtend
dtstart
location
summary
url
vevent

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.
Also, when giving coordinates, please don't be overly precise.

TemplateData

TemplateData documentation used by VisualEditor and other tools

Click here to see a monthly parameter usage report for this template.

TemplateData for ساواش بیلگی قوتوسو

Summarize information about a particular military conflict (a battle, campaign, war, or group of related wars).

پارامترهای الگوشابلون دیتانی دَییشدیر
این الگو، قالب‌بندی شخصی‌سازی‌شده دارد
پارامتر		توضیحات	نوع	وضعیت
Conflict	`conflict`	The name of the conflict being described.	خط	ضروری
Width	`width`	Width of the infobox. پیش‌فرض 315px	رشته	اختیاری
Part of	`partof`	The larger conflict containing the event described in the article.	نام صفحه	اختیاری
Image	`image`	An image for the warbox given in the form Example.jpg.	رشته	اختیاری
Image size	`image_size`	The size of the image	رشته	اختیاری
Alt	`alt`	Alternative textual description of the image	رشته	اختیاری
Caption	`caption`	The text to be placed below the image.	رشته	اختیاری
Date	`date`	The date of the conflict described. Convention is to give the actual date for battles and the years for wars, but this does not always apply.	رشته	اختیاری
Place	`place`	The location of the conflict.	رشته	ضروری
Coordinates	`coordinates`	The location of the structure, given as a coordinate pair by using {{coord}} with display=inline,title.	رشته	اختیاری
Map Type	`map_type`	The base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.	رشته	اختیاری
Map Relief	`map_relief`	"yes" if the location map is a relief map.	رشته	اختیاری
Map Size	`map_size`	Width of the location map in pixels (px). پیش‌فرض 220	شماره	اختیاری
Map Marker	`map_mark`	File to use as the location map marker. پیش‌فرض red_pog.svg	رشته	اختیاری
Map Marker Size	`map_marksize`	Width of the location map marker in pixels (px). پیش‌فرض 8	شماره	اختیاری
Map Caption	`map_caption`	Caption displayed below the location map. پیش‌فرض Location within {{{map_type}}}	رشته	اختیاری
Map Label	`map_label`	The label placed next to the marker on the location map.	خط	اختیاری
Territory	`territory`	Any changes in territorial control as a result of the conflict; this should not be used for overly lengthy descriptions of the peace settlement.	رشته	اختیاری
Result	`result`	This parameter may use one of two standard terms: "X victory" or "Inconclusive". The term used is for the "immediate" outcome of the "subject" conflict and should reflect what the sources say. In cases where the standard terms do not accurately describe the outcome, a link or note should be made to the section of the article where the result is discussed in detail (such as "See the Aftermath section"). Such a note can also be used in conjunction with the standard terms but should not be used to conceal an ambiguity in the "immediate" result. Do not introduce non-standard terms like "decisive", "marginal" or "tactical", or contradictory statements like "decisive tactical victory but strategic defeat". Omit this parameter altogether rather than engage in speculation about which side won or by how much.	خط	اختیاری
Status	`status`	For ongoing conflicts, the current status of the conflict.	خط	اختیاری
"Combatants" Header Text	`combatants_header`	Sets the header text for the combatants section. پیش‌فرض Belligerents	خط	اختیاری
Combatant 1	`combatant1`	A party participating in the conflict.	رشته	اختیاری
Combatant 2	`combatant2`	A party participating in the conflict.	رشته	اختیاری
Combatant 3	`combatant3`	A party participating in the conflict. (only if the conflict has three distinct "sides")	رشته	اختیاری
Combatant 1a	`combatant1a`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.	رشته	اختیاری
Combatant 2a	`combatant2a`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.	رشته	اختیاری
Combatant 3a	`combatant3a`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.	رشته	اختیاری
Combatant 1b	`combatant1b`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.	رشته	اختیاری
Combatant 2b	`combatant2b`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.	رشته	اختیاری
Combatant 3b	`combatant3b`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.	رشته	اختیاری
Combatant 1c	`combatant1c`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.	رشته	اختیاری
Combatant 2c	`combatant2c`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.	رشته	اختیاری
Combatant 3c	`combatant3c`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.	رشته	اختیاری
Combatant 1d	`combatant1d`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 1 field.	رشته	اختیاری
Combatant 2d	`combatant2d`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 2 field.	رشته	اختیاری
Combatant 3d	`combatant3d`	In cases where the parties significantly changed over the course of the conflict, this field may be used to provide additional rows for the Combatant 3 field.	رشته	اختیاری
Commander of Combatant 1	`commander1`	The commanders of the military forces of Combatant (1) involved.	رشته	اختیاری
Commander of Combatant 2	`commander2`	The commanders of the military forces of Combatant 2 involved.	رشته	اختیاری
Commander of Combatant 3	`commander3`	The commanders of the military forces of Combatant 3 involved.	رشته	اختیاری
Units of Combatant 1	`units1`	The units or formations of Combatant 1 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.	رشته	اختیاری
Units of Combatant 2	`units2`	The units or formations of Combatant 2 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.	رشته	اختیاری
Units of Combatant 3	`units3`	The units or formations of Combatant 3 involved. If a large number of distinct formations is present, it may be better to reference an order of battle in the body of the article than to include the entire list in this field.	رشته	اختیاری
Strength of Combatant 1	`strength1`	The numerical strength of Combatant 1.	رشته	اختیاری
Strength of Combatant 2	`strength2`	The numerical strength of Combatant 2.	رشته	اختیاری
Strength of Combatant 3	`strength3`	If Combatant 3 is set, this field is for the numerical strength of Combatant 3. If Combatant 3 is not set, this is an alternate combined field for use where only the total participation in a conflict is known.	رشته	اختیاری
Casualties of Combatant 1	`casualties1`	Casualties suffered by Combatant 1 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.	رشته	اختیاری
Casualties of Combatant 2	`casualties2`	Casualties suffered by Combatant 2 (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc.	رشته	اختیاری
Casualties of Combatant 3	`casualties3`	If Combatant 3 is set, this field is for the casualties suffered by Combatant 3, (including: dead, wounded, missing, captured and civilian deaths) and equipment losses. Terms such as "dead" (or "killed"), "wounded", or "captured" should be used in place of abbreviations such as "KIA" or "POW". Where equipment losses are reported, this should be confined to major or significant types of equipment broadly categorized such as: tanks, guns (artillery pieces), aircraft, destroyers etc. If combatant3 is not set, this is an alternate combined field for use where only the total casualties of a conflict are known, or where civilian casualties cannot be directly attributed to either side.	رشته	اختیاری
Notes	`notes`	Optional field for further notes; this should only be used in exceptional circumstances.	رشته	اختیاری
Campaignbox	`campaignbox`	Optional field for appending a campaignbox template to the bottom of the infobox, which allows both boxes to float as a single element (useful if there are subsequent left floating images, which would otherwise not be able to float above the campaign box); the template must be specified in the format {{Campaignbox XYZ}}.	رشته	اختیاری

ایشلتمک یوْلو

{{ساواش بیلگی قوتوسو|چاتیشما               = |پارچاسی               = |عکس                 = |باشلیق                = |تاریخ                 = |یئر                   = |بؤلگه                 = |سبب                 = |نتیجه                 = |جوغرافی دییشیکلیکلر = |ساواشان۱              = |ساواشان۲              = |ساواشان۳              = |باشچی۱              =|باشچی۲              = |باشچی۳              = |بیرلیک۱               =|بیرلیک۲               =|بیرلیک۳               =|گۆج۱                  =|گۆج۲                  = |گۆج۳                  = |ایتکین۱                = |ایتکین۲                = |ایتکین۳                = |نوْتلار                = }}

Search