Vektor R4

Operating mechanism

The R4 is a selective fire, gas-operated weapon that fires from a closed bolt. As with the Galil parent weapon, the operating system is derived from that of the AK-47. It uses ignited powder gases channelled through a vent in the barrel to drive a long stroke piston located above the barrel in a gas cylinder to provide power to the operating system. The weapon features a self-regulating gas system and a rotary bolt breech locking mechanism (equipped with two locking lugs), which is rotated by a helical camming groove machined into the bolt carrier that engages a control pin on the bolt. Extraction is carried out by means of a spring-loaded extractor contained in the bolt and a protrusion on the left guide rail inside the receiver acts as the fixed ejector.

Internally, the R4 differs from the Galil in the addition of a new gas tube lock to prevent the tube from shaking loose during sustained fire, and the introduction of much wider sear.^[7] It also has a unique bolt and firing pin, both of which were redesigned to resolve an issue where the firing pin would set off a chambered cartridge with the bolt closed.^[7] The new firing pin is secured by a polyurethane piece inside the bolt except when positively driven forward.^[7]

Features

The R4 is hammer-fired and uses a trigger mechanism with a 3-position fire selector and safety switch. The stamped sheet steel selector bar is present on both sides of the receiver and its positions are marked with letters: "S"— indicating the weapon is safe, "R"—single-fire mode ("R" is an abbreviation for "repetition"), and "A"—fully automatic fire. The "safe" setting disables the trigger and secures the weapon from being charged.

The R4 is fed from a steel or synthetic box magazine with a 35-round cartridge capacity (designed to use the 5.56×45mm NATO cartridge with the M193 projectile).^[7] Steel magazines were initially manufactured for the weapon, but this was replaced by a nylon and fiberglass copy to reduce weight.^[7] A 50-round steel magazine was produced during the 1980s.^[7]

The R4 has a side-folding tubular stock, which folds to the right side of the receiver. The rifle's handguard, pistol grip, magazine, stock arms and shoulder pad are all made from a synthetic material, making it lighter in weight than the equivalent original Galil model which uses heavier metal and wood in these components.

For regular field maintenance and cleaning, the firearm is disassembled into the following components: the receiver and barrel group, bolt carrier, bolt, return mechanism, gas tube, receiver dust cover and magazine.

Sights

The rifle has conventional iron sights that consist of a front post and a flip-up rear sight with 300 and 500 m apertures. The front sight is adjustable for windage and elevation and is installed in a durable circular shroud. The rear sight is welded at the end of the receiver's dust cover. For nighttime use, the R4 is equipped with self-luminous tritium light dots (exposed after placing the rear sight in an intermediate position) installed in a pivoting bar to the front sight base, which folds up in front of the standard post and aligns with two dots in the rear sight notch.

DLS has introduced remanufactured models of the R4, R5, R6 that have Picatinny rails. DLS has also introduced grenade launchers, grips and other underbarrel attachments.^[11]

The South African Navy, South African Air Force, South African Military Health Service, and South African Police Service adopted a short carbine version of the 5.56 mm Galil SAR, which was license-manufactured as the R5. The R5, when compared to the larger R4, has a barrel that is 130 millimetres (5.1 in) shorter, together with a shorter gas system and handguard. It also lacks a bipod, and the flash hider does not support rifle grenades.

In the 1990s, an even more compact personal defence weapon variant of the R5 was developed for armoured vehicle crews, designated the R6, which has a further reduced barrel and a shortened gas cylinder and piston assembly. This reduced the barrel length to 279 millimetres (11.0 in).^[8]

Denel developed prototypes for the R7 and R8, a heavy barrelled squad automatic weapon and a locally produced Micro-Galil, respectively, but it is unclear whether these entered production.^[8]

LIW/DLS also introduced a line of semi-automatic variants of the R4, R5 and R6 called the LM4, LM5 and LM6 respectively, built for civilian and law enforcement users. The rifles were marketed by Musgrave, with the joint venture between the Lyttelton and Musgrave conferring the rifle's "LM" prefix.

•  Burundi: Burundian rebels^[12]
•  Central African Republic^[13][14]
•  Eswatini: Eswatini Police^[15]
•  Haiti: Used by the Armed Forces of Haiti and Haitian National Police^[16]
•  Lesotho^[17]
•  Malawi: Malawi Police Service.^[18]
•  Republic of the Congo: 15,900 R4/R5s were delivered to Congolese security forces in 1996 and 1997.^[19]
•  Rwanda: Imported for use in the Rwandan National Army as of 1992.^[20] Some captured by the Rwandan Patriotic Front.^[21]
•  Serbia: Used by the Special Brigade^[22] and by the SAJ.^[23]
•  South Africa: Standard issue rifle of the South African National Defence Force. The compact R5 carbine is popular among police and special response units.^[24]

• Vektor CR-21
• RK 62
• Zastava M21
• List of assault rifles
• Israel–South Africa Agreement

• Woźniak, Ryszard (2002). Encyklopedia najnowszej broni palnej – tom 4 R-Z (in Polish). Warsaw, Poland: Bellona. pp. 9–10. ISBN 83-11-09312-1.

• Media related to Vektor R4 at Wikimedia Commons
• South African Galils: The R4, R5, R6 and LM series on YouTube