Ton

The ton is derived from the tun, the term applied to a cask of the largest capacity. This could contain a volume between 175 and 213 imperial gallons (210 and 256 US gal; 800 and 970 L), which could weigh around 2,000 pounds (910 kg) and occupy some 60 cubic feet (1.7 m³) of space.^[1]

There are several similar units of mass or volume called the ton:

The difference between the short ton and the other common forms ("long" and "metric") is about 10%, while the metric and long tons differ by less than 2%.

The metric tonne is usually distinguished by its spelling when written, but in the United States and United Kingdom, it is pronounced the same as ton, hence is often spoken as "metric ton" when it is necessary to make the distinction. In the United Kingdom the final "e" of "tonne" can also be pronounced (/ˈtʌni/),^[9]. In Australia, it is pronounced /tɒn/.

In Ireland and most members of the Commonwealth of Nations, a ton is defined as 2,240 pounds (1,016.04691 kg).^[a][10]

In the United States and Canada,^[11] a ton is defined as 2,000 pounds (907.18474 kg).

Other units of mass/weight

• Deadweight ton (abbreviation 'DWT' or 'dwt') is a measure of a ship's carrying capacity, including bunker oil, fresh water, ballast water, crew, and provisions. It is expressed in tonnes (1,000 kilograms (2,205 lb)) or long tons (2,240 pounds (1,016 kg)). This measurement is also used in the U.S. tonnage of naval ships.
• Increasingly, tonnes are being used rather than long tons in measuring the displacement of ships.
• Harbour ton, used in South Africa in the 20th century, was equivalent to (2,000 pounds (907 kg)) or 1 short ton.

Assay ton (abbreviation 'AT') is not a unit of measurement but a standard quantity used in assaying ores of precious metals. A short assay ton is approximately 29.17 g (1.029 oz) and a long assay ton is approximately 32.67 g (1.152 oz).^{[12][citation needed]} These amounts bear the same ratio to a milligram as a short or long ton bears to a troy ounce. Therefore, the number of milligrams of a particular metal found in a sample weighing one assay ton gives the number of troy ounces of metal contained in a ton of ore.

In documents that predate 1960 the word ton is sometimes spelled tonne,^{[citation needed]} but in more recent documents tonne refers exclusively to the metric ton.

In nuclear power plants tHM and MTHM mean tonnes of heavy metals, and MTU means tonnes of uranium. In the steel industry, the abbreviation THM means 'tons/tonnes hot metal', which refers to the amount of liquid iron or steel that is produced, particularly in the context of blast furnace production or specific consumption.

A dry ton or dry tonne has the same mass value, but the material (sludge, slurries, compost, and similar mixtures in which solid material is soaked with or suspended in water) has been dried to a relatively low, consistent moisture level (dry weight). If the material is in its natural, wet state, it is called a wet ton or wet tonne.

Subdivisions

Both the UK definition of long ton and US definition of short ton have similar underlying bases. Each is equivalent to 20 hundredweight; however, they are long 51 kilograms (112 lb) or short hundredweight 45 kilograms (100 lb), respectively.

Before the 20th century there were several definitions. Prior to the 15th century in England, the ton was 20 hundredweight, each of 108 lb, giving a ton of 2,160 pounds (980 kg).^{[citation needed]} In the 19th century in different parts of Britain, definitions of 2,240, or 2,352, or 2,400 lb were used, with 2,000 lb for explosives; the legal ton was usually 2,240 lb.^[13]

In the United Kingdom, Canada, Australia, and other areas that had used the imperial system, the tonne is the form of ton legal in trade.

The displacement, essentially the weight, of a ship is traditionally expressed in long tons.^[14] To simplify measurement it is determined by measuring the volume, rather than weight, of water displaced, and calculating the weight from the volume and density.^[15]For practical purposes the displacement ton (DT) is a unit of volume, 35 cubic feet (0.9911 m³), the approximate volume occupied by one ton of seawater (the actual volume varies with salinity and temperature).^[16] It is slightly less than the 224 imperial gallons (1.018 m³) of the water ton (based on distilled water).

One measurement ton or freight ton is equal to 40 cubic feet (1.133 m³), but historically it has had several different definitions. It is used to determine the amount of money to be charged in loading, unloading, or carrying different sorts of cargo. In general if a cargo is heavier than salt water, the actual tonnage is used. If it is lighter than salt water, e.g. feathers, freight is calculated using Measurement Tons of 40 cubic feet.^{[17][18][19][20]}

Gross tonnage and net tonnage are volumetric measures of the cargo-carrying capacity of a ship.

The Panama Canal/Universal Measurement System (PC/UMS) is based on net tonnage, modified for Panama Canal billing purposes. PC/UMS is based on a mathematical formula to calculate a vessel's total volume; a PC/UMS net ton is equivalent to 100 cubic feet of capacity.^[21]

The water ton is used chiefly in Great Britain, in statistics dealing with petroleum products, and is defined as 224 imperial gallons (35.96 cu ft; 1.018 m³),^[22] the volume occupied by 1 long ton (2,240 lb; 1,016 kg) of water under the conditions that define the imperial gallon.

Ton of TNT

• A ton of TNT or tonne of TNT is a unit of energy equal to 10⁹ (thermochemical) calories, also known as a gigacalorie (Gcal), equal to 4.184 gigajoules (GJ).
• A kiloton of TNT or kilotonne of TNT is a unit of energy equal to 10¹² calories, also known as a teracalorie (Tcal), equal to 4.184 terajoules (TJ).
• A megaton of TNT (1,000,000 tonnes) or megatonne of TNT is a unit of energy equal to 10¹⁵ calories, also known (infrequently) as a petacalorie (Pcal), equal to 4.184 petajoules (PJ).

These are small calories (cal). The large or dietary calorie (Cal) is equal to one kilocalorie (kcal), and is gradually being replaced by the latter correct term.

Early values for the explosive energy released by trinitrotoluene (TNT) ranged from 900 to 1100 calories per gram. In order to standardise the use of the term TNT as a unit of energy, an arbitrary value was assigned based on 1,000 calories (1 kcal or 4.184 kJ) per gram. Thus there is no longer a direct connection to the chemical TNT itself. It is now merely a unit of energy that happens to be expressed using words normally associated with mass (e.g., kilogram, tonne, pound).^[23][24] The definition applies for both spellings: ton of TNT and tonne of TNT.

Measurements in tons of TNT have been used primarily to express nuclear weapon yields, though they have also been used since in seismology as well.

Tonne of oil equivalent

A tonne of oil equivalent (toe), sometimes ton of oil equivalent, is a conventional value, based on the amount of energy released by burning one tonne of crude oil. The unit is used, for example, by the International Energy Agency (IEA), for the reported world energy consumption as TPES in millions of toe (Mtoe).^[25]

Other sources convert 1 toe into 1.28 tonne of coal equivalent (tce).^[27] 1 toe is also standardized as 7.33 barrel of oil equivalent (boe).^[28]

Tonne of coal equivalent

A tonne of coal equivalent (tce), sometimes ton of coal equivalent, is a conventional value, based on the amount of energy released by burning one tonne of coal. Plural name is tonnes of coal equivalent.

• Per the World Coal Association: 1 tonne of coal equivalent (tce) corresponds to 0.697 tonne of oil equivalent (toe)^[29]
• Per the International Energy Agency 1 tonne of coal equivalent (tce) corresponds to 0.700 tonne of oil equivalent (toe)^[26]

Refrigeration

The unit ton is used in refrigeration and air conditioning to measure the rate of heat absorption. Prior to the introduction of mechanical refrigeration, cooling was accomplished by delivering ice. Installing one ton of mechanical refrigeration capacity replaced the daily delivery of one ton of ice.

• In North America, a standard ton of refrigeration is 12,000 BTU/h (3,517 W). "The heat absorption per day is approximately the heat of fusion of 1 ton of ice at 32 °F (0 °C)."^[30] This is approximately the power required to melt one short ton (2,000 lb or 907 kg) of ice at 0 °C (32 °F) in 24 hours, thus representing the delivery of 1 short ton (0.893 long tons; 0.907 t) of ice per day.
• A less common usage is the power required to cool 1 long ton (2,240 lb or 1,016 kg = 1 long ton or 1.120 short tons or 1.016 t) of water by 1 °F (0.56 °C) every 10 minutes = 13,440 BTU/h (3,939 W).^[31][32]

The refrigeration ton is commonly abbreviated as RT.

• Ton is also used informally, often as slang, to mean a large amount of something.^[33]
• In Britain, a ton is colloquially used to refer to 100 of a given unit. Ton can thus refer to a speed of 100 miles per hour, and is prefixed by an indefinite article, e.g. "Lee was doing a ton down the motorway"; to money e.g. "How much did you pay for that?" "A ton" (£100); to 100 points in a game e.g. "Eric just threw a ton in our darts game" (in some games, e.g. cricket, more commonly called a century); or to a hundred of any other countable figure.^[34][35][36]
• In Dutch, when talking about money a ton is used to indicate 100,000. For example a house costing 2 ton would cost 200,000 euros.^[37] This convention has been in use since at least the 18th century.^[38]
• In Finnish, tonni is often used as a synonym for 1,000, especially when referring to money. For example, tonnin seteli was a 1000-mark banknote, and a popular TV show was called Kymppitonni ("ten tons" = 10,000 marks).